THIS SITE USES GOOGLE ANALYTICS TO ANALYSE TRAFFIC. CONTINUING TO USE THIS SITE MEANS YOU ACCEPT THE USE OF COOKIES.WE DO NOT COLLECT PERSONAL DATA LEARN MORE OR SEE OUR PRIVACY POLICY
SEVEN DAY CYCLIST
CYCLING, BUT NOT USUALLY RACING
LATEST UPDATE MARCH 9th 2026
HOW DO WE REACH THE OVERALL RATINGS FOR PRODUCTS WE REVIEW?
Leatt Pro Clip Endurance 6.0 Shoes
790g (44 as tested) £179.00
The Leatt Pro Clip Endurance 6.0 Shoes are available in men and women’s specific versions and marketed at cross county mountain biking and gravel audiences. Sitting just below the 8.0, which are a purebred race shoe. Leatt describes the Pro Clip Endurance 6.0 as, “Designed for riders who want dependable performance and all-day comfort without the race focus stiffness.” By my reckoning they deliver this by the bucket load and have scope for touring duties too.
Pros: Very versatile, will accept thicker, waterproof socks, grippy, supportive and reasonably stiff sole, user-friendly fine tuneable closure, easy to care for.
Cons: Large mesh section double-edged sword, more cleat clatter than some when walking.
Specification
Think sporty, rather than racy and synthetics rule the roost here. The upper is a Polyurethane, with an extensive translucent polymer netting to keep things temperate. Padded collars are designed with support and good, tactile tenure in mind-though certainly not stodgy, they’re certainly more luxurious than most I’ve tested. Continuing this theme, the toe box is a little more generous than a traditional race slipper, which is good news for folks with broader feet and bodes well for thicker socks during the colder months.
Staying with the uppers, the lacing system employs the increasingly default Boa type closure. In this instance, it’s a Motz/Leatt collaboration, which works to exactly the same principle. Pull out and flick the D-ring to release, press down and turn clockwise for a precision, evenly tensioned fit. Ours were ultra practical black with sizeable white graphics around the heel and side for branding and rider presence.
However, there’s also a white version should you prefer. The shank (that part between outer and midsole that holds the cleat) is 100% nylon, and I get why some of you would want something more exotic from this end of the market, but it’s also crucial for materials to have the right properties. Carbon may be super stiff and light, but likely a little unforgiving for pottering around in. The moderately aggressive outer Ride Grip outer sole is again, visibly very similar to that employed in the 8.0 and bodes well for multi surface traction and mud purging. Inside, we have a “directional” heel fabric designed to prevent slippage.
Sizing/fit4.5/5
Leatt’s sizing chart ranges between 6 and 11.5 and seems as accurate as the next brands’, which should take the second guessing out of virtual purchases. Half sizes also help on that front. I went the usual size bigger than my street shoes and bang on, aided in part by features such as the highly tuneable closure system. It’s also worth saying my feet are relatively long and narrow. I’d suggest trying a pair for size if your feet fall outside of average width or have a history of struggling to get a good, blister and hot-spot free fit. Perhaps predictably, they’re a more relaxed fit than the Sidi Aertis , Shimano SH RX600 Gravel , but slightly sportier than the FLR MXT Vibram Trail Shoes .
Power transfer/sole
Power transfer is generally very good and met my expectations of one designed to be walked, or run in. The acid test is Muffin (my fixed gear winter trainer) where I need to be out of the saddle when ascending steeper, longer climbs. Feet dancing on the Shimano M540 pedals, there was more tangible give compared with the Shimano RX6, but greater rigidity compared with the FLR MXT, and Shimano MT701 GTX .
Several hours steady road riding at 17-20mph, no hint of hotspots, or similar discomfort. Same story off road aboard Ursula and Denise (sporting Leatt’s Endurance 6.0 Clip In Pedals and Shimano ES600 SPD respectively, although being 2x10 drivetrains, I tend to drop down and spin on the climbs, placing less direct pressure on the soles.
There wasn’t much in it, but the Leatt Endurance 6.0 Clip-In Pedals proved the happiest marriage, providing fractionally more support. I wasn’t surprised by a slight squeak when paired to Denise’s single-sided Shimano - it wasn’t overly intrusive, once I’d figured out the source of said phantom intrusion. Off road, the sole offers a nice blend of power and traction, providing grip through boggy, clay soil, without becoming overwhelmed by gloop that adds unwelcome heft, requiring a stick to scoop out before clipping in.
Obviously, you’ll collect some, but I’ve found they’ll shed it with reasonable finesse. Stones were more of a lottery-some, like pea gravel could get lodged between the heel section. Out of the saddle, there’s sufficient give for navigating sections characterised by stones and tree roots. Sans bike, no issues with hot spots, or fatigue, whether I’ve been running a few errands, or chewing the cud at a rest stop. I’ve noted a little bit of cleat clatter when I’ve been walking along paved surfaces, more so than I’ve noted from the FLR MXT, but not sufficient to irritate me. Something to consider, should you want a pair that will also satisfy road biased touring needs.
Breathability/Comfort 3.75/5
Ours arrived during a very changeable, but often wet and cold January. The height of summer may reveal a different picture. Then of course, synthetic uppers usually bring some compromises when it comes to breathability. Leatt have gone for acres of mesh, which has kept things very temperate with merino blend and waterproof socks alike.
The slightly more relaxed cut, compared with a pure-bred race shoe means the latter are practical, keeping my feet dry through waterlogged lanes and slimy forest trails. Deep puddle? You can just laugh, unleash your inner child and attack the thing. The mesh will guzzle water, so cleat drillings and merino blends equal soggy feet in this scenario.
Certainly no worse than the Shimano MT701 GTX through persistent showery to moderate rain, some palpable dampness around the soles was felt given an hour, so watch the forecast and bring a pair of waterproof socks along, if you’re out, eating up the miles. Sodden, they’ll require several hours in the airing cupboard, or similarly warm, dry space away from direct heat.
Some folks commented they’d want a little more protection around the toe box, although to date, I’ve had no issues with rogue stones. I’ve found the more generously padded collar, supple tongue and heel similarly supportive, which has come into its own when I’ve been exploring and escaping the maddening crowd.
Durability/Care 3.75/5
Six weeks, 650 miles daily use and there’s no obvious weak spots. I’ve left ours caked in road and trail slime and left it to turn crusty. This is easily dismissed with a few quick shots of bike wash, lathering up with a medium soft brush dipped in warm, not hot water; one of the definite plusses of synthetic uppers. Rinse, pack with old flannels, or newspaper and leave drying naturally - either indoors away from direct heat, or outside and away from harsh, direct sunlight.
Value 3.25/5
£179 is a fair investment, but this also reflects the research and development involved in creating a shoe that can deliver in the desired attributes. Shimano RX6 is £20 cheaper (now £159.99) and are very capable gravel shoes that can also perform fairly capably off and on road. However, while I’ve found them reasonably comfortable for moderate walking, the sole is stiffer than some. Quoc Pham Grand Tourer II are £190 (presently reduced to £133), and a gravel centric model designed for distance riding and comfortable walking.
In common with our Leatt, it also employs an in-house boa-type closure. Fancy something sportier. Their Grand Tourer XC stablemates are £240 (reduced to £168) Rivalling the Endurance 6.0 at £179.99 are Sidi Aertis. I’ve found them extremely versatile on and off road, the soles are firm for good power transfer, but with sufficient flex for walking.
Specialized Recon 2.0 feature a Boa closure, welded uppers and a performance orientated, yet walkable sole. They’re also slightly cheaper at £165, but having not tried, or indeed, tested a pair, I cannot comment on real world, like for like performance.
Summary
There’s no doubt the Leatt Endurance 6.0 deliver on their design brief. Some designs have a slight edge, depending on whether you’re more tour, or race orientated. Shimano RX6 remains a firm favourite of mine, are a little lighter and where I’d steer you if you were looking to race a bit more and walk less.
Much the same story with Sidi’s Aertis. Nonetheless, the Endurance 6.0 are good all-rounders that cope well outside of the extremes. The sole offers excellent balance between pedalling efficiency and walking comfort, there’s scope for thicker socks and the closure system is easily dialled in for a precision fit.
Verdict: 3.75/5 Versatile shoes for riders seeking a good blend of power transfer and walkability.
Michael Stenning
Leatt®️: The Science of Thrill | Protective Sports Gear & Apparel – Leatt MTB UK
PUBLISHED MARCH 2026
